Useful Links

The new T775 is a flexible standalone controller that can be used in a variety of building control applications.  The T775 puts an end to add-on costs.  It has all the features you need for a variety of applications, including a built-in LCD display.

It's All Inside

Easy to Use Graphical Interface - Operating the new T775 is as easy as operating your cell phone. The easy-to-use intuitive programming will save you time on every job.

Internal Time Clock Scheduler - The Setback and Disable Output options, controlled by the built-in scheduler or digital input, will help save energy during unoccupied times and give you more control of the equipment without needing to purchase an additional time clock.

Up to Two Independent Modulating Outputs - Each output can be individually configured for 0-10 Vdc, 2-10 Vdc, 4-20 mA or Series 90, so a single device can handle many field requirements to save you time selecting the right control for the job.

NEMA 4X Enclosure Option - Certain models are offered with NEMA 4X enclosures to protect them from water and corrosion.  They can be installed in animal confinement areas, washdown areas, swimming pools and other similar locations, giving you the control you need for harsh locations.

Modulating High or Low Limit Control - If you need to protect your coil from freezing or your equipment from overheating, models offering this feature give you the ability to adjust your control temperature at sensor A to protect equipment at sensor B.  You get consistent control while still protecting your equipment.

Optional Configurable Integral and Derivative Times - Standard on every device, this feature delivers pinpoint control.  PI or PID control on modulating outputs is set up by default to behave just like the previous T775 Series 1000, but now you can adjust reaction times and behavior, giving you more control.

Reset Models with Simplified Setup - Reset programming has never been easier. Simply enter the high and low control temperatures and the corresponding high and low outdoor temperatures, and you’re done. As your outside temperature gets colder, the setpoint temperature automatically adjusts to save energy.

Configurable Minimum Off Time - If needed, setting a minimum off time can protect equipment and reduce the need for a separate time delay device.

Sensor Calibration - Calibrate input sensors up to +/-10° F. This can be used to compensate for resistance drops in wire leads, to offset the input temperature for sensor location and more.

Fewer Models - Fourteen T775 models replace 38 Series 1000 models, so you’ll reduce inventory and eliminate the headache of trying to choose the right model.

Special Models

Several T775 models are designed to ensure your control needs can still be met with a single unit for special applications.

Universal Model to Control Pressure, Humidity or any Medium with an Analog Input - The T775U Universal model has an easy setup for configuring control of pressure, humidity, temperature or anything with a 0-10Vdc or 4-20mA input.  Control humidity with %RH displayed, or control pressure with in w.c., psi, Pa or kPa displayed.  Outputs include two modulating and two relay outputs that con each have their own setpoint.  The T775U even offers the ability to reset the output based on outdoor temperature - hand when you need to reduce window condensation when setting humidity levels.  With the T775U, you'll enjoy complete versatility in a single control that give you the freedom to do what the job requires.

Special Sequencing Model for Staging up to 12 Relays with up to Two Setpoints - The sequencer  model has four stages, plus you can add up to two optional 4-stage expansion relay modules for 8- or 12-stage operation.  The flexible setup allows you to configure these stages for heating, cooling or both.  Because sequencer models operate up to 12 stages, you can control multiple low-mass boilers, chillers, electric heat and other equipment from a single controller.

Special Boiler Model - The T775 boiler model offers features including dedicated pump output, staging for up to 12 relays, digital output alarm, pump exercise, pump pre-purge and post-purge, warm weather shut-down, built-in scheduler, displayed run time and more.  With a single control you can handle multi-boiler applications.

Literature

• Sales Brochure (.pdf)
• Spec Data Sheet (.pdf)
• Installation Instructions for A,B,M Models (Standard, Modulating, NEMA 4X) (.pdf)
• Installation Instructions for R Models (Reset Option) (.pdf)
• Installation Instructions for L Model (Stage Sequencer w/ Reset Option) (.pdf)
• Installation Instructions for P Model (Special Boiler w/ Reset) (.pdf)
• Installation Instructions for U Model (Universal - Humidity, Pressure, etc.) (.pdf)
• Installation Instructions for S Model (Expansion Module) (.pdf)
• Application Guide and Cross Reference (.pdf)

Announcements

Upcoming Events

Demo Sites