A/AN-RA-18-GD
Rigid Averaging Temp. Sensor, 18 in.
by
done_outline8888 in stock
addShow Locations
removeHide Locations
10K Type III Thermistor, Galvanized Enclosure.
Features
Air Handlers, Roof Top Units, Mixed Air/Discharge/Supply/Return Air Temperature Monitoring, Data Centers, Hospitals Applications
Features A 1/4 in. Diameter Stainless Steel Sensing Element With Two, 12 in. 22 AWG Etched Teflon Colored Lead Wires To Differentiate The Different Sensor Types
The Rigid Averaging Sensors Will Provide A Better Average Temperature Of The Air Inside The Duct When Compared To A Single Point Sensing Element
Each Of The Elements Is Hermetically Sealed To Prevent Any Moisture Intrusion And Includes An Integrated Foam Pad To Properly Seal The Duct And Dampen Vibrations When Installed
The Benefits Of Using The Rigid Averaging Sensor Is That It Mounts Like A Standard Single Point Duct Sensor But Includes Three Additional Sensing Points For Better Control
Sensor Length Should Be Determined By Size Of Your Duct
Two Wire
Technical Details
Configuration
Rigid Averaging
Enclosure
Galvanized
Probe Lead
16-20
Mounting
Duct Mount
Temperature Sensor Type
10K Type III
Sensors Application
Temperature