A/CP-PM-20CL2P
Pipe Mount Temperature Sensor
by
done_outline8888 in stock
addShow Locations
removeHide Locations
10K Type II Thermistor, Stainless Steel Probe, 20 ft. 2 Conductor Plenum Rated Cable Lead Wire.
Features
Cooling Coils, Heating Coils, Hot Water Systems, Chilled Water Systems, Hydronic Heating Systems, Chillers Applications
Features A 1.1 in. Long Brass Probe With A Small Curvature On The Bottom That Is Designed To Increase The Surface Area And Improve The Thermal Conductivity Between The Pipe And The Sensor
Each Sensor Has two, 24 in. 22 AWG Etched Teflon Colored Lead Wires To Differentiate The Many Different Sensor Types
Manufactured Using ACI’s Proven Double Encapsulation Process To Eliminate The Effects Of Moisture And To Increase The Response Times Using Our High Quality, Thermally Conductive Epoxy
The Pipe Mount Sensor Should Be Used To Monitor Pipe Or Coil Sizes From 1/2 in. To 1 in. In Diameter
A 7.5 in. Nylon Wire Tie Is Supplied For Fastening The Sensor To The Top Of The Pipe
ACI Recommends To Clean The Pipe And To Apply Thermal Grease Between The Sensor And Pipe Before Securely Fastening To The Pipe And Insulating The Sensor From Any Effects Of The Ambient Air
Two Wire
Technical Details
Configuration
Bullet Probe
Enclosure
No Box
Probe Lead
0-1
Mounting
Pipe Mount
Temperature Sensor Type
10K Type II
Sensors Application
Temperature