Multi-Input Signal Actuator, 5 Nm
done_outline8888 in stock
addShow Locations removeHide Locations
24 VAC, 2 To 10 VDC Or 4 To 20 mA Input Signal With Field Furnished 500 ohm 1/4 W Resistor, For Proportional Control Or 24 VAC, Dual Wire On/Off Control.


2 Analog Inputs
5-Year Warranty
Microprocessor-Controlled Brushless DC Motor
Mode Configuration Switches
Simplified Installation And Field Wiring
Small Footprint
Position Indicator Handle And Manual Override
Manufactured Under ISO-9001 Quality Control Standards
UL, CE Mark, And RCM Compliance
100,000 Cycles And 2.5 Million Repositions

Technical Details

Power Consumption
4.7 VA Running
Operating Conditions
32 F To 140 F (0 C To 60 C), 90% RH, Non-Condensing,
Electrical Connections
120 in. UL 444 Type CMP Plenum Rated Cable With 0.75 mm² (19 AWG Cable) Conductors And 0.25 in. Ferrule Ends
NEMA 5, IP54