phone_in_talk
(800) 482-4894
schedule
M-F 7:30AM - 5:00PM EST
VG1245FR+910HGA
Brass Ball Valve Assembly, 2 in.
by
done_outline8888 in stock
addShow Locations
removeHide Locations
2-Way, Stainless Steel Trim, Non-Spring Return, VA9300 Series Actuator, 200 Close Off psi, 29.2 Cv, 24 VAC/DC.
Features
NPT, Sweat, And Press End Connections Provides The Right Valve For A Broad Range Of Applications, Reduces Installation Time While Reducing The Need For Adapters, And Increases System Reliability
Blowout-Proof System Protects The User From Risk Of Injury
Maintenance-Free Design, Performs Without Failure In Excess Of 200K Full Stroke Cycles In Iron-Oxide Contaminated Water
Forged Brass Body — Provides 580 psig Static Pressure Rating
Amodel Flow Characterizing Disk Maintains Equal Percentage Flow Characteristics For Best Temperature Control
200 psi Close Off Pressure Rating Which Provides Tight Shutoff
Chrome-Plated Brass Ball And Stem Assembly Standard Which Handles Both Chilled And Hot Water Applications For Fluids Temperatures 23F To 203F
300 Series Stainless Steel Ball And Stem Assembly Tolerates High Temperature Water Or 15 psi Saturated Steam With Fluid Temperatures -22F To 284F, Or Where A Higher Degree Of Corrosion Protection Is Desired
500 To 1 Rangeability, Provides Accurate Control Under All Load Conditions
Ethylene Propylene Diene Monomer (EPDM) Double O-Ring Stem Seal Provides Leak-Free Seal; The Packing Has Been Tested And Is Leak-Free After 200,000 Cycles In Iron-Oxide Contaminated Water
Graphite-Reinforced Polytetrafluoroethylene Seats, Include 15% Graphite-Reinforced Ball Seals, Providing Better Wear Resistance