R7847B1031/U
Flame Signal Amplifier
by
done_outline8888 in stock
addShow Locations removeHide Locations
2.0 Second Or 3.0 Second Flame Failure Response Time, Ampli-Check Self Checking, Green Color.

Features

Use With Flame Sensor: Gas Rectifying Flame Rods C7004, C7005, C7007, C7008, C7009, Q179/ Gas Oil Coal: UV Flame Sensor C7012A/C
Use With Primary Safety Control: 7800 Series Relay Modules
Flame Signal Strength From 0.0 To 5.0 VDC
Plug Into 7800 Relay Module Through Printed Circuit Board Edge Connector Keyed For Proper Orientation
Flame Signal Test Jacks To Measure Amplifier Flame Signal Voltage
Color-Coded Labels Identify Flame Detection Type