PTA2
Signal Transducer
by
done_outline8888 in stock
addShow Locations
removeHide Locations
Pulse Width Modulate To Voltage Output, 0.02 To 5.0s, 0.1 To 10.0s, 0.59 To 2.93s, 0.1 To 25.5s Input Pulse Range, 0 To 10 VDC Voltage Output Signal.
Features
Accepts A Timed Contact, Or Solid State Closure, From A Microprocessor Controller And Converts It To A Linear Analog Output With 255 Steps Of Resolution
The PTA2 Will Not Wrap Around If An Excessively Long Pulse Is Received
Seven Input Pulse Rates Are Jumper Selectable
The Input Signal Is Optically Isolated And Can Accept Either Positive Or Negative Polarity
Includes Triac Adapter Circuitry (Jumper Selectable) For A Triac Input
Has A Jumper Selectable Manual Override Which Will Allow Modulation Of The Output Between 0-10 VDC To Verify Proper Operation Of The Controlled Device